Hey guys, I have a question. I have an 06 Ranger 4WD that I just did upper and lower ball joints, tie rod ends, and shocks all the way around on. When I first bought the truck, I cranked the torsion bars to level it. I never had any issues with the ride ever (close to 100K since cranking), and everything was stock including the shocks. Well today I installed some cheapie Monroe shocks, and the truck is pretty bad going over bumps. It bounces pretty bad front to back when I hit a bump, it looks like it has a ricer bounce. Im just wondering if I need to go to a stiffer shock. Even the worn out OEM shocks didn't ride like this. I didn't change anything with the torsion bars but it rides pretty bad now. The rear end travels up and down like stock, but I can barely get the front end to bounce when I push down on the front bumper which is normal considering that the bars are cranked. Im just wondering if the shocks are TOO soft, and this is causing the truck to buck over bumps....
↧